Sixteen natural residues against four modified ones
MOTS-c is a 16-residue peptide whose sequence is encoded within the 12S rRNA region of the mitochondrial genome; the material supplied for laboratory work is made by solid-phase synthesis. SS-31, also called elamipretide, is a synthetic tetrapeptide from the Szeto-Schiller series, built from alternating basic and aromatic residues, two of them non-standard. The figures below are the ones published on the MOTS-c 10mg, MOTS-c 40mg and SS-31 10mg listings, with the expected ions calculated from those formulas.
| Property | MOTS-c | SS-31 (elamipretide) |
|---|---|---|
| Sequence | MRWQEMGYIFYPRKLR | D-Arg-Dmt-Lys-Phe-NH2 (Dmt = 2,6-dimethyltyrosine) |
| Residue count | 16 | 4 |
| Termini | Free amine, free acid | Free amine; C-terminal amide |
| Non-standard residues | None | D-arginine; 2,6-dimethyltyrosine |
| Molecular formula | C101H152N28O22S2 | C32H49N9O5 |
| CAS registry number | 1627580-64-6 | 736992-21-5 |
| Theoretical average mass | 2,174.6 g/mol | 639.8 g/mol |
| Theoretical monoisotopic mass | approximately 2,173.1 | approximately 639.4 |
| Ions a mass spectrum typically shows | Multiply charged: near m/z 1,087.6 (2+), 725.4 (3+), 544.3 (4+) | near m/z 640.4 (1+) and 320.7 (2+) |
| Oxidation-prone residues | Methionine at 1 and 6, tryptophan at 3 | None (no methionine, cysteine or tryptophan) |
| Sulfur in the formula | Two | None |
| Physical form supplied | Lyophilized solid | Lyophilized solid |
The masses above are calculated from the formulas on the listings; read them as orientation. The report for a specific lot is the authoritative record, and where it disagrees with this page, the report governs.
MOTS-c: oxidation is the line to read
- Three oxidation-prone residues in the first six positions. One oxidised methionine adds 16 units, a second adds 32, and both species are resolvable directly by mass spectrometry.
- Oxidised forms elute earlier. They are more polar, so a shoulder or small peak on the early side of the main peak is the expected signature on a reversed-phase trace.
- Tryptophan degrades in more than one way. Several small early peaks are more consistent with tryptophan chemistry than with synthesis impurities. The full discussion is in MOTS-c: identity, purity, and why oxidation is its failure mode.
SS-31: the error a mass result cannot see
- A D-residue weighs the same as its L-form. If the wrong arginine isomer were incorporated, the mass would still agree. Diastereomers generally separate on a reversed-phase column, so the chromatogram, or an HPLC-RTM result against a named reference standard, is what catches it.
- Your own arithmetic will disagree with the certificate. Dimethyltyrosine is about 28 units heavier than tyrosine and is not in a standard residue table, and the C-terminal amide is about one unit lighter than an acid. The stated formula is the reference. See SS-31: alternating aromatic and basic residues.
- Strongly basic, so read the peak shape and the net content. Arginine, lysine and the free N-terminus can cause tailing on reversed-phase columns, and on a 640 g/mol molecule the counterions of the supplied salt can be a substantial share of the weighed solid.
What each certificate of analysis must show
| Report section | For a MOTS-c lot | For a SS-31 lot |
|---|---|---|
| Identity | Mass in agreement with 2,174.6 g/mol (monoisotopic near 2,173.1) within tolerance, with the charge states listed or the deconvoluted mass stated, or HPLC-RTM against a named MOTS-c reference standard | Mass in agreement with 639.8 g/mol (monoisotopic near 639.4) within tolerance, or HPLC-RTM against a named SS-31 reference standard; the D-residue is only confirmed by the chromatographic result |
| Chromatographic purity | Main-peak area as a percentage of total integrated area, with the chromatogram published; check the early side of the main peak for oxidised species (+16, +32) | The same figure and trace; check peak shape for tailing and for a near-eluting diastereomer peak |
| Net content | Measured mg of peptide in the vial, stated next to the labeled strength | Measured mg of peptide in the vial, stated next to the labeled strength |
| Endotoxin | Where tested: the method (LAL, with the USP <85> reference if claimed), the result with its units (EU per mL, per mg or per vial), and the limit it was compared against. | |
| Heavy metals | Where tested: the elements in the panel, the method, and a result or "none detected" against a stated reporting limit. | |
| Method fields | Column, mobile phase or gradient, detection wavelength, and reporting limit. A percentage with no method attached is not a result. | |
| Record fields | Material name, labeled strength, lot identifier matching the vial label, test date, certificate or accession number, and the issuing laboratory with its verification route. | |
Endotoxin and heavy-metal screens are only part of a report when the laboratory ran them. If a line is not on the certificate, that test was not performed on that lot; it has not been passed. The endotoxin testing guide explains what a LAL result and a USP <85> pass mean, and net peptide content explains why the measured mg can differ from the label.
How to tell them apart on paper
- Find the stated mass. Near 2,175 is MOTS-c; near 640 is SS-31.
- Look for sulfur in the formula. MOTS-c contains two S atoms; SS-31 contains none.
- Read the ion list. A MOTS-c report shows a family of multiply charged ions; an SS-31 report shows a singly charged ion near m/z 640.
- Check the strength on the record. A 10 mg lot report does not describe a 40 mg vial, even for the same compound.
How to read our reports for these two
Our current reports come from three laboratories. Freedom Diagnostics reports give purity by HPLC-UV, identity by LC-MS, net content in mg, and an endotoxin result where one is listed; each carries an accession number and a search code for the laboratory's lookup page. ILS Laboratories reports give purity by HPLC, identity by retention-time match against a reference standard, net peptide content, and the screens run on that lot. Janoshik Analytical reports carry the laboratory's own verification key. Verify a lab report walks through each lookup.
- MOTS-c 10mg: lot MOTS-2510-A, 99.64% by HPLC-UV, identity confirmed by LC-MS, net content 11.50 mg, endotoxin pass (LAL, USP <85>, 2 replicates), reported Nov 1, 2026 by Freedom Diagnostics, accession 2610284023, search code Arct2610284023.
- MOTS-c 40mg: listed in November 2026. Each lot is third-party tested, and the report is posted on the product page and in the COA library when it is back. The 10 mg report above describes lot MOTS-2510-A only.
- SS-31 10mg: listed in November 2026. Each lot is third-party tested, and the report is posted on the product page and in the COA library when it is back. As of this page's date (November 10, 2026) no SS-31 report is published yet.
Common questions
How do MOTS-c and SS-31 differ on a certificate of analysis?
MOTS-c is a 16-residue peptide, MRWQEMGYIFYPRKLR, C101H152N28O22S2, 2,174.6 g/mol. SS-31 is the tetrapeptide D-Arg-Dmt-Lys-Phe-NH2, C32H49N9O5, 639.8 g/mol. Their masses, sulfur content and ion patterns are all different, so a report for one cannot describe the other.
What mass should each report state?
MOTS-c: about 2,173.1 (monoisotopic) or 2,174.6 g/mol (average), usually seen as ions near m/z 1,087.6, 725.4 and 544.3. SS-31: about 639.4 (monoisotopic) or 639.8 g/mol (average), near m/z 640.4 and 320.7.
What impurity does each sequence predict?
MOTS-c has two methionines and a tryptophan, so oxidised species 16 or 32 units heavier, eluting just before the main peak, are the expected impurity. SS-31 has no oxidation-prone residue; the error to rule out is a wrong D/L isomer, which has the same mass and is caught by the chromatogram.
Which MOTS-c and SS-31 lots are documented on this site?
MOTS-c 10mg lot MOTS-2510-A has a published Freedom Diagnostics report (99.64% by HPLC-UV, LC-MS identity, net content 11.50 mg, endotoxin pass, Nov 1, 2026). MOTS-c 40mg and SS-31 10mg were listed in November 2026; their lot reports are posted on the product pages and in the COA library when they are back.