Why third-party testing matters
A seller can write anything on a product page. A report from an independent laboratory, tied to one lot and carrying a code you can look up on the lab’s own website, is something you can check. That is the whole point of third-party testing: the result does not depend on the seller’s word.
What the tests answer
| Test | Question it answers | Common method |
|---|---|---|
| Identity | Is the sample the compound on the label? A match confirms the molecule. | Mass spectrometry (LC-MS), which compares observed and expected molecular mass; or HPLC retention-time match against a reference standard |
| Purity | How clean is the sample? The share of the measured signal that belongs to the main compound. | High-performance liquid chromatography (HPLC), often with UV detection (HPLC-UV) |
| Net content | How much material is in the vial, against the labeled amount? | Stated as an amount found per vial; not every report includes it |
| Endotoxin | Did the sample pass a bacterial endotoxin test? Relevant for in-vitro work, where endotoxin can confound results. | USP <85> bacterial endotoxins test (LAL), reported as a value in EU or a pass against a limit |
Identity and purity are different questions. A sample can be very pure and still be the wrong compound, and purity alone cannot tell you which molecule is there. A useful report answers both. An endotoxin pass does not mean “zero endotoxin”; it means the result was within the limit tested. More detail: endotoxin testing, explained.
How to read a lot report
- Who tested it. The laboratory’s name and a report, certificate or accession number.
- What was tested. The product, the labeled amount per vial and the lot number.
- Which tests were run. Identity, purity, and any content or endotoxin result, each with its method written next to it.
- The results. A number with a method, ideally with the chromatogram. A bare percentage gives you nothing to judge.
- Dates and sign-off. When the sample was received and tested, and who released the report. The test date should make sense for the lot being sold.
A line-by-line guide is in how to read a peptide COA.
Verify it with the lab
Anyone can edit a PDF. The check that matters is a three-way match: the seller’s copy, the lab’s own copy (opened on the lab’s website with the code printed on the report), and the lot number on your vial. If all three line up, the report describes what you have. Step-by-step lookups for Janoshik, Freedom Diagnostics and ILS Laboratories are in how to verify a peptide lab report.
What Arctic’s reports cover
Arctic’s current lot-matched reports come from three independent laboratories. What each covers depends on the lab and the lot, so each report lists the tests that were run.
- Freedom Diagnostics. Identity by mass spectrometry (LC-MS) and purity by HPLC-UV. The October 2026 reports and the November 2026 MOTS-c and NAD+ reports also include an endotoxin pass on USP <85> (2 replicates). Example: BPC-157 10MG lot BP-2501A.
- ILS Laboratories. Purity by HPLC, identity by HPLC retention-time match against a reference standard, net peptide content and an endotoxin test (USP <85>); some also include an ICP-MS heavy-metals panel. Example: BPC-157 5MG lot BCP-2502-B.
- Janoshik Analytical. Reports carry a task number and key that you can look up on Janoshik’s public verification page.
Each product page says whether a lot-matched report is published for that listing. All current reports, with lot numbers and verification links, are in the report library.
What testing cannot tell you
- A report describes a sample, not your parcel. Matching the lot number on the label to the report is a step you do yourself.
- Nothing about untested lots. A report applies only to the lot named on it.
- Nothing about storage or shipping after testing.
- Nothing about use in people or animals. Analytical reports describe a sample, nothing else.
Every current report is public, with the lot number and a link to the lab’s own verification page.
Common questions
What is third-party peptide testing?
An independent laboratory, not the seller, tests a sample from a production lot and issues a report with the lot number, the methods used, the results and a certificate or accession number you can look up on the lab’s own website.
What does HPLC purity mean?
HPLC purity is the share of the measured chromatography signal that belongs to the main compound, for example 99.3%. It says how clean the sample is, not whether the molecule is the right one.
How is peptide identity tested?
Usually by mass spectrometry (MS or LC-MS), which compares the molecular mass observed in the sample with the expected mass of the labeled compound. Some labs instead confirm identity by HPLC retention-time match against a reference standard. The report should say which method was used.
Does every peptide report include endotoxin testing?
No. Endotoxin is a separate test. Check the report’s list of tests. Each report in the Arctic library lists the tests that were run.
How do I verify a peptide lab report?
Open the laboratory’s own verification page yourself and look the report up with the code printed on it. The lab’s copy should match the seller’s copy, and the lot number should match your vial.
Does Arctic publish reports for every product?
No. Arctic publishes a report for each lot it has had independently tested, and each product page says whether a lot-matched report is currently published. The current reports are listed at arcticlabsupply.com/coas.