Best TB-500 supplier: a buyer's checklist

Almost every "best TB-500 supplier" list is published by a company that appears on it. This page is not a ranking. It is six checks you can run on any TB-500 listing in a few minutes — this one included — plus the specific ways sellers of this particular peptide tend to fail them.

Packed and shipped from Anchorage, AKTracking on every shipmentFree U.S. shipping at $149Laboratory research use only · 21+
Research-use scope. Everything listed on this site is supplied for laboratory, analytical, educational, and in-vitro research only. Not for use in people or animals. This page is about documentation practice and how to evaluate a listing. It contains no handling, preparation, or procedural guidance of any kind.

Why TB-500 draws so many weak listings

TB-500 is one of the most searched research peptides, which means it is also one of the most resold. It is also one of the most loosely named: the label is used both for full-length thymosin beta-4 and for a short synthetic fragment of it, and many listings never say which one is in the vial. Add blend pages that fold TB-500 into a mixture without testing it alone, and the paperwork rarely matches the product. None of that is visible from a product photo or a price.

The genre of "best supplier" lists makes it worse. A company publishes a ranking, appears near the top of it, and fills the rest with commission partners or with names that never responded to outreach. Where a third party publishes the list, the ordering usually tracks who pays most per referred order. The fix is not a better ranking — it is criteria that cannot be gamed, because a supplier either passes them or does not, and you can check which without their help.

What the checks below separate is a supplier that had TB-500 analyzed by lot from a reseller forwarding finished vials with paperwork inherited from upstream. Nothing is inherently wrong with reselling. The question is only whether anyone tested the specific batch you are buying, and whether you can see the record.

For this compound the first question is what the label means. A useful report states the sequence or molecular mass that was measured, so you can tell which material was tested. A purity number with no identity result does not answer it.

Six criteria, applied to a TB-500 listing

CRITERION 01

Is the report matched to the lot, or a generic TB-500 datasheet?

A certificate of analysis describes one sample, from one lot, on one date. It is not a general TB-500 specification.

That distinction is the whole criterion. A generic report states what TB-500 is supposed to be — often the exact PDF a contract manufacturer hands every reseller of its stock — and a lot-matched report states what a laboratory measured in a specific batch, named in a way you can check against the label when the vial arrives.

How to check it
Open the TB-500 listing and find its report. Look for a lot identifier printed on the document, and look for the same identifier on the listing, so you know which batch is currently being sold. On arrival, compare it with the lot printed on the vial label.
What failing looks like
No lot identifier anywhere on the document; a document headed "TB-500 typical values" or "product specification"; a lot number on the label that appears nowhere in the report you were shown.
CRITERION 02

One document per TB-500 batch, or the same PDF across strengths?

A batch record covers one batch. The same document attached to a TB-500 listing and a "TB-500 + TB-500" blend is a catalogue sheet wearing a lab coat.

TB-500 is sold alone and inside blends by the same storefronts. Reuse means either the batch in front of you was never separately analyzed, or its analysis is not the document being shown.

How to check it
Open the report for every TB-500 strength or blend a supplier sells, side by side. Compare certificate numbers, analysis dates, and — if chromatograms are published — the traces themselves.
What failing looks like
A "TB-500" report attached to a blend page with no TB-500-specific line item; the same PDF across strengths; identical certificate numbers or test dates across different products.
CRITERION 03

Is the issuing laboratory named, and independently contactable?

The reported percentage is not what makes a TB-500 document trustworthy. The ability to confirm the document with its issuer is.

A report can be copied, edited, or presented for a lot it never described. What resists all three is a certificate number held on record by a named laboratory that will confirm what the number refers to. If no laboratory is named, the document rests entirely on the seller's word — the situation it was supposed to fix.

How to check it
Find the certificate number on the document, then find a verification route belonging to the laboratory rather than to the supplier. Compare four fields against the PDF you hold — sample identity, labeled strength, lot identifier, analysis date.
What failing looks like
No laboratory named; verification available only by emailing the supplier; the certificate number not found at all; the number found but the identity, strength, lot, or date differs from the PDF.
CRITERION 04

Was the report published before the batch went on sale, or after someone asked?

The order of operations is the signal. A record published before a TB-500 batch is offered is a control step. A document produced after someone complains is a response.

A report you have to request is also a report whose absence you cannot detect while you are still deciding whether to buy.

How to check it
Check whether the TB-500 report is readable before checkout, without an account or a support ticket. Then compare the analysis date on the report against the period the batch has been listed.
What failing looks like
"COA available on request" next to the TB-500 listing; documentation behind an email capture; a test date that postdates the listing by months.
CRITERION 05

Do older TB-500 lot reports stay public, or quietly disappear?

A library that only ever shows the current TB-500 batch cannot be audited, and an archive is the one thing on this list that is expensive to fake.

TB-500 batches restock often. If the record disappears at the same moment a lot sells out, anyone still holding a vial from that batch loses the ability to check what it was tested against.

How to check it
Look for a TB-500 report covering a lot no longer being sold. Note a certificate number and its URL today, then open it again after the next restock.
What failing looks like
Report pages that return errors after a restock; a library whose contents exactly mirror current inventory; the old lot's document overwritten in place rather than kept alongside the new one.
CRITERION 06

Are the method, the date, and the CAS number all stated?

Identity and purity are different questions for TB-500, and a number with no method attached is not a result.

Chromatographic purity (HPLC) describes how much of what was measured is a single component. Identity, which material that component actually is, is normally confirmed separately by mass spectrometry, and for TB-500 the measured mass also tells you whether the full protein or the short fragment was tested. A high purity figure establishes nothing about identity.

How to check it
On the report, find the named method and the analysis date before you look at the number. Check that identity was tested by mass spectrometry and that the report says which material it describes.
What failing looks like
No CAS number anywhere on the listing; "99%+ purity" as a listing claim rather than a dated, measured value; a single purity figure presented as if it also settled identity.

The one-page scorecard

Take this to any TB-500 listing, in any order. Nothing here requires contacting the seller first.

CheckPasses ifFails if
Lot-matchedThe report names one lot, printed on the vial you receiveGeneric TB-500 datasheet, or a lot on the label absent from the document
One per batchEvery TB-500 strength and blend has its own document and certificate numberOne PDF or chromatogram reused across strengths or blends
Laboratory namedAn issuing laboratory is named with its own verification routeNo laboratory named, or verification only through the seller
Published firstReadable before checkout, dated ahead of the batch being listedAvailable on request, gated, or produced only after a complaint
Archive keptReports for retired TB-500 lots still resolve at their original addressRecords disappear or are overwritten on restock
Method, date, CASMethod, units, date, and an identity result that says which material was testedA bare percentage with no method, date, or CAS number

What this checklist cannot tell you

A page that claimed these six checks settled everything would be failing its own standard.

Running the checklist on this site

The criteria above apply here too. Every item is checkable without asking us anything.

One honest qualification: the library currently holds one published TB-500 lot. That is a fact about this catalogue right now, and this checklist is designed to make exactly that kind of thing visible rather than explain it away.

Why we published a checklist instead of a ranking. A list that put us first would be worth nothing to you, because you already know how those lists are made. The only claim worth anything is one you could catch us failing: open the report, check the certificate number with the laboratory that issued it, and match the lot on the label when the vial arrives. If any of that does not hold, the checklist has done its job.

Start with the report rather than the listing. Both are open, and neither requires an account.

Read the TB-500 batch report

Questions

Why are "best TB-500 supplier" lists unreliable?

Most are published by a company that appears on them, or by a site paid per referred order, and they rank on criteria that cannot fail. A useful criterion is one an outsider can check without the supplier's cooperation, and one a supplier can visibly fail.

Does a TB-500 listing need to state a CAS number?

A stated CAS number is not proof by itself, and for TB-500 it can be ambiguous, because the name is used for more than one material. The identity result on the report, usually a mass-spectrometry measurement, is what tells you which material was tested.

What does a lot-matched TB-500 report look like?

It names one lot identifier, one analysis date, and one method, and that lot identifier is printed on the label of the vial you receive. A generic report states what TB-500 is supposed to be rather than what was measured in the specific batch being sold.

Is TB-500 the same as thymosin beta-4?

The name is used for both. Some sellers mean full-length thymosin beta-4; others mean a short synthetic fragment of it. A report with a mass-spectrometry identity result tells you which material was actually tested.

Read further